Aldi, today, had for sale the cordless hammer drill titled “WorkZone Titanium+ XFinity Li-Ion 20V Cordless Hammer Drill”. I spent some time searching the Internet to try and find out the manufacturer but I was unable. As this is the first time I know of that these products have been released to market I am writing this post with pictures of the boxes and products for others.

Battery Pack

Let’s start with the battery pack because without the battery there is no appliance.

The battery is titled “XFinity Plus 20V Battery System XFinity Li-Ion 20V 2.0AH Battery” and the battery purchased had a capacity of 2.0 amp hour (AH). The following is the view of the box from different angles:

XFinity Plus 20V Li-Ion 2.0AH Battery Box Top View

XFinity Plus 20V Li-Ion 2.0AH Battery Box Left View

XFinity Plus 20V Li-Ion 2.0AH Battery Box Front View

XFinity Plus 20V Li-Ion 2.0AH Battery Box Right View

XFinity Plus 20V Li-Ion 2.0AH Battery Box Rear View

XFinity Plus 20V Li-Ion 2.0AH Battery In Plastic Bag

XFinity Plus 20V Li-Ion 2.0AH Battery Manual

XFinity Plus 20V Li-Ion 2.0AH Battery Top View

XFinity Plus 20V Li-Ion 2.0AH Battery Left View

XFinity Plus 20V Li-Ion 2.0AH Battery Bottom View

Battery Charger

A battery isn’t much good unless the battery can be charged. So a charger was purchased. The charger is titled “XFinity Plus 20V Battery System XFinity Li-Ion 20V Quick Charger”. The following is the view of the box from different angles:

XFinity Plus 20V Li-Ion Quick Charger Box Top View

XFinity Plus 20V Li-Ion Quick Charger Box Left View

XFinity Plus 20V Li-Ion Quick Charger Box Front View

XFinity Plus 20V Li-Ion Quick Charger Box Right View

XFinity Plus 20V Li-Ion Quick Charger Box Rear View

XFinity Plus 20V Li-Ion Quick Charger In Plastic Bag

XFinity Plus 20V Li-Ion Quick Charger Manual In Plastic Bag

XFinity Plus 20V Li-Ion Quick Charger Top View

XFinity Plus 20V Li-Ion Quick Charger Bottom View

When power is applied the green LED is lit.

XFinity Plus 20V Li-Ion Quick Charger With Green LED Lit

When a battery is charging the red LED flashes. When charging is complete the red LED stays lit and does not flash (one must remove the battery when the red LED is steady according to the manual).

XFinity Plus 20V Li-Ion Quick Charger With Red LED Flashing During Battery Charge

Cordless Hammer Drill

The cordless hammer drill is titled “WorkZone Titanium+ XFinity Li-Ion 20V Cordless Hammer Drill”.

According to the box the technical specs are:

voltage: 20Vd.c.
no load speed: 0-380/0-1400/min
torque setting: 21
maximum torque: 28Nm
chuck diameter: 13mm
LED worklight: yes

The model is PT160103, version number 0001, product code is 56226, and the date is listed as 04/2017. After sales support line is given to be 1300 777 137 with an e-mail of service@actionspares.com.au.

Contents are listed as:

1 x Hammer drill
1 x Belt hook
1 x Double ended bit
1 x Auxiliary handle
1 x Instruction manual
1 x Warranty certificate

The box states “made in China”.

The following is the view of the box from different angles:

WorkZone Titanium+ XFinity Li-Ion 20V Cordless Hammer Drill Box Top View

WorkZone Titanium+ XFinity Li-Ion 20V Cordless Hammer Drill Box Left View

WorkZone Titanium+ XFinity Li-Ion 20V Cordless Hammer Drill Box Front View

WorkZone Titanium+ XFinity Li-Ion 20V Cordless Hammer Drill Box Right View

WorkZone Titanium+ XFinity Li-Ion 20V Cordless Hammer Drill Box Rear View

WorkZone Titanium+ XFinity Li-Ion 20V Cordless Hammer Drill Box Opened

WorkZone Titanium+ XFinity Li-Ion 20V Cordless Hammer Drill Front View

WorkZone Titanium+ XFinity Li-Ion 20V Cordless Hammer Drill Right View

WorkZone Titanium+ XFinity Li-Ion 20V Cordless Hammer Drill Rear View

WorkZone Titanium+ XFinity Li-Ion 20V Cordless Hammer Drill Bottom View

WorkZone Titanium+ XFinity Li-Ion 20V Cordless Hammer Drill With Battery Pack

According to the manual there are 3 function types:

(icon of drill bit) regular drilling setting for drilling wood, plastic, metal
(icon of hammer) hammer drilling setting for hammer drilling masonry
(triangular-ish icon) driving setting for tightening or loosening screws

The torque setting is from 1 to 21, 1 being the lowest torque, 21 being the highest.

The speed setting on top of the drill is 1 (slow/low) or 2 (fast/high). High speed has less torque.

The product claims to adhere to technical standards AS/NZS 60745.1, 60745.2.1, and 60745.2.2.

The drill has considerable “whine” – a high pitch tone that changes in pitch depending on how far in the trigger is pulled.

Sadly the first drill I bought failed to observe any of the torque settings (it would drive regardless of how tight it became). I took it back and replaced it with another that now correctly observes the torque setting.